Smart 3D Print Pen Multicolored Speed Adjustable Easily To Hold
With 1 Free Filament
|Packing List||Pen/9m Filament/Manual/Pen Base/USB Cable|
|Printing Material||ABS/PLA 1.75mm|
|Power input||12V 3A|
- OLED Screen shows your control of temperature and filament.
- Intelligence auto standby mode after 5 minutes idling
- With the templates you can drawing the beautiful object more easily
- Ceramic nozzle resist high temperature,avoiding scald
Using Your 3D Pen:
First:Connect the power adaptor to the back of the 3D pen and then ait
for the preheat status( the yellow LED turns on)
Second:Press the "forward" button, the red LED would turn on. The red
light will turn into green, preheating is done and the pen is
ready, after 30 seconds,
Third:Insert the ABS or PLA filament into the " loading hole" which is at
the end of the pen. Keep on pressing the"forward" button, the
material will be loaded by built-in motor.
Hold till the plastic material comes out from the nozzle nip, so
the material loading is finished.
Fourth:Keep pressing the button to draw your 3D objects. Adjust the speed
by pressing speed controller. Releasing the button will cause the
pen to stop extruding.
Fived:To unload or change the filament, you should press the unloading
button, You may need to adjust the speed controller.